 |
| CATIA V5-6R2015 Basics Part II: Part Modeling |
Basic Sketch Based Features
•Pad•Shaft
•Project 3D Elements
•The Plane command
•Offset from plane
•Parallel through Point
•Through three points
•Through two lines
•Through point and line
•Through planar curve
•Normal to curve
•Tangent to surface
•Equation
•Mean through points
•Coordinates
•On curve
•On Plane
•On Surface
•Circle/Sphere/Ellipse center
•Tangent on curve
•Between
•Line
•Additional options of the Pad and Pocket commands
•Limits
•Thick
•View commands
•Measure Commands
Holes and Dress-Up Features
•Hole
•Simple Hole
•Counterbored Hole
•Countersunk Hole
•Tapered Hole
•Threaded Hole
•The Thread/Tap command
•The Edge Fillet command
•Limiting element(s)
•Blend corner(s)
•Variable Radius Fillet
•Chordal Fillet
•Face-Face Fillet
•Tritangent Fillet
•The Chamfer command
•Draft Angle
•Draft Reflect Line
•Variable Angle Draft
•Shell
Patterned Geometry
•The Mirror command•Rectangular Pattern
•Circular Pattern
•User Pattern
•Scaling
•Affinity
Rib Features
•The Rib command•The Slot command
Multi Section Solids
•The Multi-sections Solid command•Types of the Cross-sections
•Couplings
•Spines
•Guides
•Relimitation
•Removed Multi-sections Solid
Additional Features and Multibody Parts
•Stiffener•Solid Combine
•Multi-body Parts
•Creating Multi-bodies
•Insert in new body
•Assemble
•Add
•Remove
•Intersect
•Union Trim
•Remove Lump
Modifying Parts
•Edit Sketches•Edit Feature Definition
•Edit Feature Parameters
•Deactivate Features
•Activate Features
•Changing the Sketch Support